Cisco Training Courses
Local, instructor-led live Cisco training courses demonstrate through interactive discussion and hands-on practice the fundamentals and advanced topics of Cisco networking. Cisco training is available as "onsite live training" or "remote live training". Onsite live training can be carried out locally on customer premises in Canada or in NobleProg corporate training centers in Canada. Remote live training is carried out by way of an interactive, remote desktop. NobleProg -- Your Local Training Provider
Handson and setup were nicely done and practical knowledge thoroughly imparted. Trainer was really helpful throughout.
Course Name: SIP protocol in VoIP
Knowledge and the method of its transfer
Elavon Financial Services DAC (Sp. z o.o. o Wyznaczonym Przedmiocie Działalności) Oddział w Polsce
Course Name: Protokół SIP w VoIP
|3712||Cisco CCNA Syllabus in 5 Days||35 hours|| |
A 5 day practical networking course designed to familiarise students with Cisco IOS (version 12). The course details the key commands used to configure and secure Cisco routers and switches, and covers the CCNA syllabus - including wired and wireless LAN access.
Students will inter-connect networks by implementing static routes, distance-vector and link-state based dynamic routing protocols.
The devices will be configured to route traffic across LAN/VLAN//WAN boundaries, by encapsulating datagrams across serial data links using various WAN protocols, such as HDLC, Frame Relay, ISDN and PPP (with CHAP authentication). VLAN encapsulation/tagging will be via IEEE802.1Q/P.
Standard and Extended Access Control Lists will be configured and applied to router interfaces to filter traffic based on IP address and/or traffic type.
Students will configure static and dynamic NAT to route between private and public networks and cover the theory of Virtual Private Networks (VPN's)
Students will copy router configurations and IOS images to/from a TFTP Server. Privileged commands will be used to debug TCP/IP protocols to ensure proper operation of the routers. Students will also perform password recovery operations.
The course is primarily aimed at IP v4 but does give an overview of IP v6 addressing and covers migration from an IP v4 to an IP v6 network. Other protocols and technologies (VPN's / Wireless) may be demonstrated if time permits.
Course can be customised to precise requirements of customer.
This course is suitable for anyone looking for a basic understanding of internetworking with Cisco devices and covers the CCNA syllabus.
Course is approximately 50% practical
|casapixo||Cisco ASA/Pix Operation||28 hours|| |
A 4 day instructor-led practical course designed to familiarise delegates with the Cisco ASA Firewall CLI and ASDM. The course details the key commands used to configure and secure networks using the ASA Firewall with v8 of the operating system and version 6 of the ASDM.
Delegates will configure the ASA using the console port, TFTP server, telnet and SSH using local and RADIUS authentication. The device will be configured to utilise Syslog and SNMP.
ASA Firewalls will also be configured to use Access-Lists, Network Address Translation and VPN's utilising IPSec protocols. The course will cover the theory of Public/Private Keys, shared secret keys and their use in forming Site to site VPN's between ASA Firewalls using IKE and IPSec. Students will configure the units to create site to site VPN's, remote access VPN's using the Cisco Secure VPN Client and Web VPN's. The course will cover the theory of failover and delegates will configure Active/Standby failover on the ASA.
Privileged commands and protocol analyser traces will be used, where necessary, to debug protocols and ensure proper operation of the ASA Firewall. Students will also perform password recovery operations.
This course will involve interfacing the ASA with other network equipment, such as routers and switches, as would be expected in a network environment.
Course is suitable for anyone involved in ASA firewall configuration and network security
Course is approximately 50% practical
|waaacdwtacacs||One Day Workshop for AAA of Cisco Devices using a Windows-based TACACS+ Server||7 hours|| |
Suitable for network planners, engineers or anyone interested in TACACS+ operation with Cisco IOS devices.
Course is almost entirely practical if one day. If extended to 2 days due to lack of pre-reqs it will be around 50% practical.
|waaacdwnpsr||One Day Workshop for AAA of Cisco Devices using Windows 2008 NPS RADIUS||7 hours|| |
This one day workshop covers the configuration and operation of the RADIUS protocol in the authentication, authorisation and accounting of accessing the management software of Cisco IOS devices. The RADIUS server is Network Policy Server (NPS) in Windows 2008 R2.
Suitable for network planners, engineers or anyone interested in RADIUS operation with Cisco IOS Devices and NPS.
Workshop is almost all practical. If extended to 2 days it will be approximately 50% practical.
|wciosd||Workshop for Cisco IOS Devices Implementing IPSec using Certificate Authentication via a Windows 2008 R2 CA||7 hours|| |
This one day workshop covers the configuration and operation of negotiating IKE/IPSec Security Association (SA) between Cisco IOS devices. The devices will authenticate using certificates provided through enrollment with a Windows 2008 R2 Certification Authority. The Windows 2008 R2 server will run the Simple Certificate Enrollment Process (SCEP) using the Network Device Enrollment Service (NDES).
Suitable for network planners, engineers or anyone interested in operation of Cisco IOS devices running IPSec using certificate authentication.
|wpeapawscw||One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server||7 hours|| |
This one day workshop covers the configuration and operation of the IEEE802.1x protocol in the authentication and authorisation of a wired Windows 7 supplicant. The authenticator is a Cisco Switch and the server is Windows NPS running on Windows 2008 R2 server, operating as a Certification Authority (CA). The EAP protocol is Protected EAP (PEAP) and a successful request will be allocated a VLAN on the switch via RADIUS attributes received from the server following successful authentication. The procedure for a wired supplicant is almost identical to that of a wireless supplicant.
Suitable for network planners, engineers or anyone interested in operation of PEAP with Cisco IOS Devices and NPS.
|67525||Cisco Unified Wireless Network (CUWN)||35 hours|| |
This course enables a network administrator to deploy a wireless LAN (WLAN) enterprise solution through the identification and successful implementation of site-appropriate hardware and software features in a Cisco Unified Wireless Network.
Anyone involved in the deployment of a wireless LAN solution.
After you complete this course you will be able to:
|sipvoip||SIP protocol in VoIP||21 hours|| |
The course consists of two complementary parts – a theoretical and a practical one. The first is a one day introduction covering motivation, philosophy, fundamentals and rules of operation of the SIP protocol and ways it is used to implement telecom services with focus on IP telephony and VoIP. The second two-day part enables participants to learn practical aspects of service operation within a framework of hand-on laboratory exercises giving detailed insight into configuration of components of SIP telephony architecture, SIP signalling at both message sequence chart and internal message structure levels, and assists in understanding of typical problems and troubleshooting including security and telecom fraud aspects. The trainers will share their experience in launching, operation and management of SIP telephony covering also virtualization and cloud based solutions. Practical part is presented using both SIP hardphones and softphones and IP telephony servers (Asterisk and Freeswitch). Participants can take advantage of the fact trainers have got rich technical and business experience in IP telephony and submit their own problems and questions. They will be included in the agenda at wrap-up as a supplement to the training to meet current urgent needs of clients. Training is addressed to participants with basic knowledge and experience in telecom services – specifically in VoIP and IP networking.
|Course||Course Date||Course Price [Remote / Classroom]|
|Cisco CCNA Syllabus in 5 Days - Calgary - Sun Life||Mon, Jul 30 2018, 9:30 am||CA$10450 / CA$12850|
|Cisco ASA/Pix Operation - Calgary - Macleod Place II||Mon, Jul 30 2018, 9:30 am||N/A / CA$10620|
|Workshop for Cisco IOS Devices Implementing IPSec using Certificate Authentication via a Windows 2008 R2 CA - Ottawa - 343 Preston||Mon, Jul 30 2018, 9:30 am||CA$2250 / CA$3960|
|One Day Workshop for AAA of Cisco Devices using Windows 2008 NPS RADIUS - Winnipeg - 201 Portage Avenue||Tue, Jul 31 2018, 9:30 am||CA$2250 / CA$3910|
|One Day Workshop for AAA of Cisco Devices using a Windows-based TACACS+ Server - Toronto - West Toronto - Etobicoke||Thu, Aug 2 2018, 9:30 am||N/A / CA$3880|
|Course||Venue||Course Date||Course Price [Remote / Classroom]|
|Enabling SOA with BPM and BPMN||Quebec - Sainte Foy||Tue, Aug 21 2018, 9:30 am||CA$3870 / CA$5770|
|Nato Architecture Framework (NAF)||London - London City Centre||Mon, Sep 10 2018, 9:30 am||CA$9405 / CA$11705|
|Lua Fundamentals||Halifax - Purdy's Wharf||Thu, Sep 27 2018, 9:30 am||CA$3870 / CA$5760|
|Drupal 8 for Developers||Vancouver - Park Place||Mon, Oct 15 2018, 9:30 am||N/A / CA$6130|
|Haskell Fundamentals||Ottawa – Albert & Metcalfe||Tue, Nov 27 2018, 9:30 am||CA$3870 / CA$5690|